Error 19 · Err 19 · BATTERY_COMM

VanMoof Error 19, explained.

Q: Is Err 19 the same as Error 19?

Yes. The matrix display abbreviates it as Err 19. The bike's internal logs and the Moofment app's diagnostics screen show it as Error 19.

Also shown as Err 19 on the matrix display · symbolic name BATTERY_COMM

VanMoof's official documentation says Error 19 "indicates an internal communication issue with the battery." The symbolic name BATTERY_COMM refers to the Modbus link between the main controller and the BMS.

What does Error 19 actually mean?

Battery safety: Battery codes are BMS protection states or hardware faults. Don't repeatedly try to ride or charge through a battery error — these protections exist to prevent thermal events. If a battery code persists after a normal reset and full charge cycle, stop using the battery and visit a VanMoof Partner for diagnosis. Battery faults can become dangerous if ignored.

What to try

VanMoof's official troubleshooting sequence is the same for every error code. Work through it in order:

Step 1 — Make sure the latest firmware is installed. Pair your bike with the original VanMoof app (see callout below) and let it apply any pending firmware updates.
Step 2 — Reset your bike. Hold the power button until the bike fully powers down, wait a few seconds, and turn it back on. A 10-second power-button hold is Step 2 of VanMoof's official troubleshooting sequence and often clears transient codes.
Step 3 — Perform a system restart. If the code persists after a reset, do a full system restart from the bike menu.
Still unresolved? Visit a VanMoof Partner for diagnosis and repair. VanMoof's documentation defers to authorised service partners for any error that survives the three universal steps above.

VanMoofer is an independent site. We don't ship parts or repair bikes — we just help you understand what your bike is telling you, using VanMoof's own canonical documentation as the source of truth.

Use the original VanMoof app for firmware updates

Step 1 of VanMoof's own troubleshooting sequence is making sure your bike has the latest firmware — and that update path only exists in the original VanMoof app, not Moofment. Pair the two: VanMoof app for firmware, Moofment for live Bluetooth diagnostics on the S3/X3.

S3 / X3 only

Read Error 19 (and every other code) live.

Moofment connects directly to your VanMoof S3 or X3 over Bluetooth and reads diagnostic codes the moment they appear — with plain-language explanations and no cloud accounts. If you're staring at Err 19 right now, this is the fastest way to confirm what the bike is reporting.

Get Moofment

Frequently asked

What does VanMoof Error 19 mean?

Error 19 has the symbolic name BATTERY_COMM. Battery comm (Modbus). It belongs to the battery group of VanMoof's S3/X3 diagnostic codes.

Is Err 19 the same as Error 19?

Yes. The matrix display abbreviates it as Err 19. The bike's internal logs and the Moofment app's diagnostics screen show it as Error 19 / BATTERY_COMM.

What should I try first when Error 19 appears?

Follow VanMoof's official 3-step troubleshooting sequence: install the latest firmware (via the original VanMoof app), reset your bike, then perform a system restart. If Error 19 still appears, visit a VanMoof Partner for diagnosis. See the 'What to try' section above for the full sequence and any code-specific hints VanMoof publishes.

Which VanMoof models show Error 19?

Error 19 belongs to the diagnostic code set used by the VanMoof Series 1 through Series 5 platform. In practice it appears most often on the S3 and X3, because that's where the matrix display surfaces it directly to the rider.

Can I read Error 19 from my phone?

Yes. The Moofment app reads live diagnostic codes over Bluetooth on the S3 and X3. Pair it with the original VanMoof app for firmware updates and you have full coverage.