Error 13 · Err 13 · BAT_COTP

VanMoof Error 13, explained.

Q: Is Err 13 the same as Error 13?

Yes. The matrix display abbreviates it as Err 13. The bike's internal logs and the Moofment app's diagnostics screen show it as Error 13.

Also shown as Err 13 on the matrix display · symbolic name BAT_COTP

Error 13 is part of the battery protection group (errors 0–15). VanMoof's official documentation explains this range as: "Errors 0–15 indicate several issues with your battery, including short-circuit protection, temperature protection, voltage protection, and charge and discharge protection." The symbolic…

What does Error 13 actually mean?

Battery safety: Battery codes are BMS protection states or hardware faults. Don't repeatedly try to ride or charge through a battery error — these protections exist to prevent thermal events. If a battery code persists after a normal reset and full charge cycle, stop using the battery and visit a VanMoof Partner for diagnosis. Battery faults can become dangerous if ignored.

What to try

VanMoof's official troubleshooting sequence is the same for every error code. Work through it in order:

Step 1 — Make sure the latest firmware is installed. Pair your bike with the original VanMoof app (see callout below) and let it apply any pending firmware updates.
Step 2 — Reset your bike. Hold the power button until the bike fully powers down, wait a few seconds, and turn it back on. A 10-second power-button hold is Step 2 of VanMoof's official troubleshooting sequence and often clears transient codes.
Step 3 — Perform a system restart. If the code persists after a reset, do a full system restart from the bike menu.
Still unresolved? Visit a VanMoof Partner for diagnosis and repair. VanMoof's documentation defers to authorised service partners for any error that survives the three universal steps above.

VanMoofer is an independent site. We don't ship parts or repair bikes — we just help you understand what your bike is telling you, using VanMoof's own canonical documentation as the source of truth.

Use the original VanMoof app for firmware updates

Step 1 of VanMoof's own troubleshooting sequence is making sure your bike has the latest firmware — and that update path only exists in the original VanMoof app, not Moofment. Pair the two: VanMoof app for firmware, Moofment for live Bluetooth diagnostics on the S3/X3.

S3 / X3 only

Read Error 13 (and every other code) live.

Moofment connects directly to your VanMoof S3 or X3 over Bluetooth and reads diagnostic codes the moment they appear — with plain-language explanations and no cloud accounts. If you're staring at Err 13 right now, this is the fastest way to confirm what the bike is reporting.

Get Moofment

Frequently asked

What does VanMoof Error 13 mean?

Error 13 has the symbolic name BAT_COTP. Charge over-temp. It belongs to the battery group of VanMoof's S3/X3 diagnostic codes.

Is Err 13 the same as Error 13?

Yes. The matrix display abbreviates it as Err 13. The bike's internal logs and the Moofment app's diagnostics screen show it as Error 13 / BAT_COTP.

What should I try first when Error 13 appears?

Follow VanMoof's official 3-step troubleshooting sequence: install the latest firmware (via the original VanMoof app), reset your bike, then perform a system restart. If Error 13 still appears, visit a VanMoof Partner for diagnosis. See the 'What to try' section above for the full sequence and any code-specific hints VanMoof publishes.

Which VanMoof models show Error 13?

Error 13 belongs to the diagnostic code set used by the VanMoof Series 1 through Series 5 platform. In practice it appears most often on the S3 and X3, because that's where the matrix display surfaces it directly to the rider.

Can I read Error 13 from my phone?

Yes. The Moofment app reads live diagnostic codes over Bluetooth on the S3 and X3. Pair it with the original VanMoof app for firmware updates and you have full coverage.